Cast your vote in the Aviation 100 Regional Awards Survey
17th August 2017
Chromalloy says its new thermal barrier coating enhances the performance of gas turbine engines.
"Chromalloy's new thermal barrier coating – the RT-35 Low K coating – provides lower thermal conductivity, which allows higher engine temperatures," said Dr Peter Howard, vice president, technology and quality assurance.
The RT-35 Low K coating was patented by Chromalloy in 2006 and certified by the Federal Aviation Administration (FAA) in 2010 for use on the PW4000 second stage high pressure turbine blade after a series of tests confirming its low thermal conductivity, high thermal cycle durability and other attributes.
The RT-35 Low K coating provides a layer of insulation to the base metal component and underlying bond coating surface of a turbine blade from the extreme heat of the combustion gases during engine during operation.
"The coating provides 50-percent lower thermal conductivity, allowing engines to perform at higher temperatures," Howard said. "Engines produce greater thrust when operating at higher temperature – and they can operate on the same amount of fuel as powerplants that operate at lower temperatures.
"Chromalloy's RT-35 Low K coating is a critical driver for the engine to deliver greater fuel efficiency to the operator," he said.
RT-35 Low K coating increases the oxidation and corrosion resistance of the underlying bond coating as it is cooler and thus extends the life of the engine components – another cost saving for the operator.